Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

Evaluation of combined developmental neurological toxicity of di (n-butyl) phthalates and lead using immature mice

Environmental Science and Pollution Research - In this study, the immature mice were taken to assess the potential neurological toxicity of lead (Pb) and di (n-butyl) phthalates (DBP) combination...     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

酸性土壤条件下纳米氧化锌长期暴露对蕹菜生长和叶绿素荧光参数的影响

为了探明酸性土壤条件下纳米氧化锌（nano-ZnO）长期暴露对蕹菜的生理生态效应，通过盆栽实验，设置7个浓度系列的nano-ZnO，70 d后测定相对叶绿素含量、生长参数和叶绿素荧光参数。结果显示，随nano-ZnO浓度升高，蕹菜相对叶绿素含量和生长参数先缓慢增加后显著下降。nano-ZnO对蕹菜生物量在根部和冠部间的分配无显著影响。相对叶绿素含量与nano-ZnO浓度呈显著负相关（r=-0.879,p<0.001）。在nano-ZnO质量比为160 mg/kg时，光合有效辐射190μmol/(m²·s)诱导的激发能过剩，但过剩激发能可通过热耗散保护机制消耗，以避免发生光损伤。酸性土壤条件下，弱光诱导的蕹菜叶绿素荧光参数对nano-ZnO长期暴露不敏感，但蕹菜的生物量累积易受nano-ZnO长期暴露的影响。     

基于复式记账的土地资源资产核算与报表编制研究

借鉴会计学复式记账核算的优点,在国际资源核算体系的基础上,根据我国自然资源资产核算需求,提出土地资源资产核算的复式记账体系和报表编制框架。研究认为,基于复式记账的土地资源资产核算和报表编制要以“摸清家底、反映自然资源负债、提供土地资源审计和绩效考核信息”为目标,明确区、县级自然资源局为土地资源资产受托管理和进行土地资源资产核算与报表编制的核算单位。在界定土地资源资产、负债和权益相关概念的基础上,提出土地资源资产属性变化的核算内容和每次土地资源资产实物量变化必须遵循占补平衡的基本原则,进行过程核算。以YC县土地资源资产变化为例,对土地资源资产变化进行了基于复式记账的土地资源资产核算与报表编制实证研究,确定核算的事项类型和特征及其借贷核算流程,编制出土地资源资产负债表,并同时进行实物量核算和价值量核算的报表编制,结果表明:YC县土地资源资产实物量1485 km^2,2018年末价值量5639874.22万元、经济权益5271874.22万元、生态权益367991.6万元,土地资源负债8.40万元,通过土地资源资产用途调整,土地资源资产价值量增加21319.42万元,但在调整过程中,形成了土地资源负债0.07 km^2(8.4万元),在以后土地整治中需要增加园地。     

基于农村生活污水生态处理工艺研究

伴随我国经济发展的进步,虽然农村的生活水平得到一定的改善,但是并没有根据实际情况将相关生态处理技术应用,导致农村污水处理的效率无法有效的提升,严重影响农村的发展。基于此,本文主要分析了农村生活污水处理的方式,以及污水处理不当对人们的危害与影响,并阐述了农村污水处理的主要对策与方案,笔者根据自身经验提出相应的建议与意见。     

机动车尾气污染及防治对策研究

汽车是当今社会中人们最重要的代步工具,在人们的日常生活中占据着不可替代的位置。随着我国经济快速发展,城市机动车数量不断增加,导致尾气污染问题也日益严重,这不仅对大气质量造成了不良影响,同时也严重危害到了人们的身体健康。因此,机动车尾气污染问题必须得到有关部门高度重视,并且结合造成污染加剧的主要原因,找到机动车尾气污染防治的有效对策。本文将针对机动车尾气污染危害及防治对策进行分析。     

水环境监测信息化新技术的应用分析

随着国民经济的快速发展,我国人民的生活水平和质量也随之而提高,对于生态环境以及居住环境的要求也相应提升。水是万物之源,是保障人们生产生活的基本要素之一,为了有效提升水环境质量,先进的水环境监测技术必不可少。随着科学技术的飞速发展,水环境监测技术也在不断调整和优化,逐渐向信息化方向发展,在生态环境保护工作中发挥着不可替代的作用。本文将详细阐述现阶段我国在水环境监测工作中实施的信息化新技术,希望能为相关研究人员提供参考和借鉴。     

生态环境检测及环保技术的应用研究

本文以生态环境检测及环保技术的应用为研究对象,主要介绍了生态环境检测以及环保技术应用面临的主要问题,而且提出了生态环境检测及环保技术应用的有效措施,希望可以为相关工作人员提供参考意见。